Products

Square tube

Square tube is a hollow commercial profile normally manufactured in S235 quality. It is used as a support for structural elements, carpentry and metalwork.

Finishing and gutters

The various meetings of auction They are resolved by means of longitudinal pieces of sheet metal, formed by folded. These finishing pieces will be adjusted to the characteristics of each meeting and roof solution and, therefore, Therefore, their dimensions will have to be defined for each project. They are available in both galvanized steel as in the different colours of pre-painted galvanised steel.

Length: up to 6 m Thicknesses: from 0.60 mm to 1.00 mm.

Gutters

Water drip

Ridge

Bib

Roof panels

2GRECAS/3GRECAS

Configured with a ribbed steel face on the outside, a PUR or PIR insulating core and a ribbed face on the inside with the possibility of different finishes depending on the needs of each project. Developed for pitched roofs with a minimum slope of 7%. Its screw system with hidden fixing (flashing) guarantees the watertightness of the system and gives it a modern and functional appearance. Its profile perfectly combines great mechanical capacity with a finish with few ribs.

Useful width: 1000 mm Thicknesses: 30/40/50/60/80/100/120 mm

IMITATION TILE PANEL

It is made up of an outer sheet that resembles the shape of a classic tile, giving the panel a pleasant appearance. It can be installed directly as the only final cover or on any other surface, using it as a final finish and insulation. It combines high mechanical performance, high levels of thermal and acoustic insulation and a high level of aesthetic finish. It is quick and easy to install. Lightweight and easy to maintain. With a wide variety of finishes.

Useful width: 1000 mm Thicknesses: 20/30/40 mm

Facade panels

They are made up of 2 steel sheets and a PUR or PIR insulating core inside, to guarantee maximum thermal insulation performance. They can be installed both vertically and horizontally, in both cases the panels are joined by a tongue and groove joint, obtaining a continuous and watertight skin. Their surface finish can be completely smooth, semi-smooth or profiled. We offer a wide range of colours.

Useful width: 1100 mm Thicknesses: 35/40/50/60/80/100 mm

MODULAR FACADE PANEL

The MODULAR panel offers the best solution to the aesthetic and technical requirements of projects. It is manufactured in a wide range of colours and coatings. Designed to be installed on architectural facades, with a fixing system with hidden screws, without the need for a flashing profile.

Useful width: 900/1000 mm Thicknesses: 35/40/50/60/80/100 mm

Rock wool panels

COVER PANEL

3-rib panel with a joint cover that provides the characteristics of the traditional panel: watertightness, thermal insulation, easy assembly and also the advantages of fireproof rock wool insulation. Possibility of prefabricated transverse overlap with a maximum length of 300 mm.

They are made up of 2 pre-painted steel sheets and a rock wool insulation core of 100kg/m3 and 125kg/m3 inside, to guarantee maximum thermal insulation performance.

Useful width: 1000 mm Thicknesses: 40/50/60/80/100 mm

FACADE PANEL

It is a panel with hidden screws that can be made in different finishes (micro-beaded, semi-smooth and smooth) that, combined with the different possibilities of materials (Steel, Aluminum) and coating qualities and colors, allows aesthetic and technical solutions adapted to each project.

They are made up of 2 pre-painted steel sheets and a rock wool insulation core of 100kg/m3 and 125kg/m3 inside, to guarantee maximum thermal insulation performance.

Useful width: 1000 mm Thicknesses: 40/50/60/80/100 mm

Fire: A2-s1,d0 || Water: Not hydrophilic || Acoustic: depending on its thickness|

It does not cause or promote corrosion of materials. It does not promote bacterial development.

SECTORIZATION PANEL

Exposed screw panel for use in all types of modular solutions. It has the same types of finishes and aesthetic solutions as the façade panel.

They are made up of 2 pre-painted steel sheets and a rock wool insulation core of 100kg/m3 and 125kg/m3 inside, to guarantee maximum thermal insulation performance.

Useful width: 1000 mm Thicknesses: 40/50/60/80/100/120 mm

Fire: A2-s1,d0 || Water: Not hydrophilic || Acoustic: depending on its thickness|​

It does not cause or promote corrosion of materials. It does not promote bacterial development.

Profiled sheet metal

They are the most conventional and economical finish for roof and facade enclosures, which are fundamentally used in industrial construction.

Miniwave

18 mm high corrugated sheet metal, available in various finishes: galvanised, aluzinc and pre-painted in a variety of colours.
Useful width: 1064 mm Thicknesses: Up to 1.2 mm
Lengths: between 1000 mm and 14000 mm

32

It is defined by the 42 mm height of the fret, available in various finishes: galvanized, aluzinc and pre-lacquered in a variety of colors.
Useful width: 1000 mm Thicknesses: Up to 1.2 mm
Lengths: between 1000 mm and 14000 mm

42

18 mm high corrugated sheet metal, available in various finishes: galvanised, aluzinc and pre-painted in a variety of colours.
Useful width: 1000 mm Thicknesses: Up to 1.2 mm
Lengths: between 1000 mm and 14000 mm

LIGHTING PANELS for roofs and facades

Polycarbonate panels designed for use as a natural lighting system. They provide thermal insulation and are designed to distribute light inside, avoiding glare. They are an optimal lighting solution and compatible in assembly and arrangement with the rest of the panels.

They are available in different colors.

Useful width: 1000 mm Thickness: 30 mm Fire: B-s1,d0

SEAL JOINT

Basically composed of open-cell polyurethane foam, impregnated with acrylic materials that provide it with excellent qualities to perform the sealing function, closing the gaps and trapezoids of the plates or panels to be placed on facades or roofs, both in exterior areas (ridges and finishes) and in interior areas (gutters and finishes).

The impregnation forms a continuous film on the cell walls of the polyurethane foam, causing them to close when compressed, making the product more or less watertight depending on the degree of compression.
The impregnated foam is rot-proof in extreme environmental conditions, indestructible by insects, birds, rodents, etc., invariable in impregnation and colouring and unalterable in acidic solutions at 2% and common salt type at 5%.

SCREW AND RIVETS

Fastening systems, screws, nuts, washers and rods enjoy a high reputation in the construction sector due to their quality.

They comply with the parameters indicated in DIN/ISO manufacturing standards. In addition, they provide excellent mechanical qualities such as surface hardness, core hardness, carburizing depth, torsion resistance, corrosion resistance, etc.

MINERAL WOOL BLANKET FOR ROOFS AND FACADES

Glass wool product designed to provide thermal and acoustic insulation and fire protection in the construction of metal sandwich panels “in situ”.
Easy and quick installation. Does not generate dust.
Light and stable product. 100% recyclable.​ .​
It does not degrade over time, it does not require maintenance.
Improves energy efficiency.
Inert material, not suitable for the development of microorganisms.

OMEGA PROFILE​

This laminated profile offers a solid support and allows for efficient assembly of sandwich roofs “on site” due to its lightness and strength. This profile has a dual function, it serves as a spacer between sheets to provide the appropriate space for the insulation material and also serves as a strap on which the upper sheet of the roof will be fixed.

Where are we?

C/ Almendro, Parcela 21 H
Pol. Industrial La Mora,
47193 La Cistérniga, Valladolid

Contact form